High-voltage external connector RND 35/2000 UHL1 at 35 kV
The high-voltage external connectors of the RND 35/2000 UHL1 rated voltage 35 kV are designed to enable and deactivate the energized areas of the high-voltage electrical circuits, as well as earthing of disconnected areas by means of grounding knives (if any)
The RND 35/2000-UHL1 connectors have a single-pole, bipolar and three-pole design. The pole to which the drive is connected is the lead. The drives are designed to operate with disconnectors. The drive shafts of the main circuit and the ground collar are rotated manually, with the aid of the drives of the MD-2B or GDP-Y bipolar and three-pole disconnectors, the remaining poles are driven. The connection of the drive pole to the drive and the drive pole to the driven poles is carried out by the consumer when preparing the disconnector for use.
RND 35/2000-UHL1 SYMBOLS:- R – disconnector
- N – external installation
- D – two column
- 35 – rated voltage, kV
- 2000 – rated current, A
- UHL – climate performance according to GOST 15150-69
- 1 – accommodation category according to GOST 15543.1-89
- Altitude not exceeding 1,000 m
- Ambient temperature from -60°C to +40°C
- Relative humidity not more than 100% at 25°C
- Vertical or horizontal disconnect, it is also permissible to have a disconnect in the inclined plane up to 45°
- Climatic conditions of UHL, category of accommodation 1 through GOST 15150-69
- Ice crust thickness: up to 10 mm for 35 kB disconnectors
- Wind speed without ice not more than 40 m/s;
- Wind speed with not more than 15 m/s ice
- Isolation category – “A” or “B”
- Service for not less than 25 years
- Disconnector RND 35/2000 UHL1 – 1 pc.
- Manual MD-14 drive – 1, 2 or 3 pc. (depending on the number of earthing knives)
- Passport – 1 pc.